Panasonic KX-T 1232 Programming Codes

RETURN TO PAGE 2 

Move switch on left side of cabinet to PROGRAM.  Use main phone to program. (Return to middle position when done)

Code

Description (Default)

00

Time/Date

01

System Speed Dial (00 to 99)

02

Extension Number Assignment (01=101 etc.)

03

Operator Assignment (Operator 1 and Operator 2)

04

Paired Telephone DSS Console Assignment

05

Automatic CO Transfer using DSS key (With/Without Transfer)

06

Day/Night Service (Manual/Automatic)

07

System Starting Time for Day/Night service (9:00 AM to 5:00 PM)

08

Call Hunting Setting (Group 1 through Group 8)

09

Hunting Type (Terminate/Circular)

12

Toll Restriction-System Speed Dialing (Class 1, 2, 3, 4, 5)

13

Toll Restriction-Class 2 Denied Code Assignment

14

Toll Restriction-Class 3 Denied Code Assignment

15

Toll Restriction-Class 4 Denied Code Assignment

16

Toll Restriction-Class 5 Denied Code Assignment

17

Toll Restriction-Denied Code Assignment

18

Hold Recall Time set (.5 Min./1 Min./1.5 min./2 Min./Disable)

19

Transfer Recall Time (30 Seconds/2 Minutes(

20

Call Forwarding Start time (1,2,3,4 rings delay)

21

Pickup Dial Delay Time (1, 2, 3, 4 Seconds)

22

CO to CO Duration Time Limit 1 to 32 Minutes

23

SMDR

RS232

Parameters

CR+LF, CR

Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600

Word Length 7 Bits, 8 Bits

Parity None, Mark, Space, Even, Odd

Stop Bit Length 1 Bit, 2 Bits

24

SMDR Parameters (Lines per page 66) (Skipping lines 0)

25

Incoming/Outgoing Selection for printing

26

Secret Speed Dialing/One Touch Dial printing (Printing/No Printing)

27

SMDR System Data Dump

28

Duration Time Count Start Mode (5, 10, 15 Seconds after dial)

29

External Paging Access Tone (Enable/Disable)

31

DISA (Enable/Disable)

32

OPX (Enable/Disable)

33

OHCA (Enable/Disable)

34

System Working Report

40

CO Connection (Connect/Not Connect Lines 1 through 12)

41

DTMF/Pulse/Call Blocking

42

Pulse Speed Selection

43

Host PBX Access Codes Assignment

44

Trunk Group Assignment 1-8

45

Outward Dialing, Day (All stations enabled)

46

Outward Dialing, Night (All stations enabled)

47

Ringing, Day (All stations enabled)

48

Ringing, Night (All stations enabled)

49

Ring Delay, Day (1, 2, 3, 4, Immediate Rings)

50

Ring Delay, Night (1, 2, 3, 4, Immediate Rings)

51

CO Mode, Day (Normal, DIL, DISA)

52

CO Mode, Night (Normal, DIL, DISA)

53

Pause Time Assignment (1.5, 2.5, 3.5, 4.5 Seconds)

54

Hook Flash time (300ms 600ms 900ms 1200ms)(600ms default)

55

CPC

56

Disconnect Time (1.5, 4.0 Seconds)

57

Auto Designated line access (Enable/Disable)

60

Extension Groups 1 through 8 (Group1)

61

Service Class Assignment of Toll Restriction, Day

62

Service Class Assignment of Toll Restriction, Night

63

Extension Name

64

Account Code Input Mode

65

Call Transfer to Outside line (Enable/Disable)

66

Call Forwarding to Outside Line (Enable/Disable)

67

Executive override (Enable/Disable)

68

DND Override (Enable/Disable)

69

SLT Connection with proprietary telephone (Enable/Disable)

70

Ringing from Door Phone, Day (Enable/Disable)

71

Ringing from Door Phone, Night (Enable/Disable)

72

Assignment of Door Opener, Day (Enable/Disable)

73

Assignment of Door Opener, Night (Enable/Disable)

80

Voice Mail Port assignment (Enable/Disable) (Circle3, Circle B only)

81

DTMF Integration Assignment  (Enable/Disable) (Circle3, Circle B only)

91

Call on Hold for SLT (Hold 1=Flash or Hold 2=Flash 20)

99

System Data Clear

Voice Mail Integration (Forwarding) (B is recommended for TVS) (Circle3, Circle B only)
Setting A 7191# Forwards a mailbox number to the VPS port
Setting B 7192# #6 plus a mailbox number is sent to the VPS
Cancel 7190# Cancels all forwarding

RETURN TO PAGE 2